Graphite
gaskets are cut from pure graphite sheet or graphite
sheet with metal reinforcement, features excellent corrosion-resistance,
high-and-low temperature resistance, good compression resilient
and high internsity it can be used as sealing elements of pipe,
valve, pump, pressure vessel, heat exchanger and condenser,
etc. Other complex gaskets such as water gauge gasket and flange
gasket with bolt holes are available. Wrapped with metallic
stripe in the inner and outer circle borderline. Keep the former
excellent performances. Can be installed and disassembled conveniently
without damage.
Thickness : 1.5mm, 2.0mm,
3.0mm, 4.5mm
Application:
Flanges, valve bonnets, heat exchangers, level indicatiors etc.
Typical Service
Fluids : High temperature & pressure steam, hot water, gases,
heat midium, hydrocarbon, organic so;vents, acids, alkalis(PH0-14),LPG,LNG,liquefied
oxgen, nitrogen and hydrogen etc.
Type
Name
Constructuion
Pressure
( Mpa )
Temperature (°C)
Redcing Atmosphere
Oxidizing Atmosphere
Pure graphite gasket
3
-240~1650
-240~400
Reinforced graphite gasket with punched metal
5
-240~450
-10~450(CS)
-240~560(SS304)
Reinforced graphite gasket with adhesive metal
5
-240~450
-240~560(SS304)
-200~870(SS316)
Cixi
Weilite Sealing Material Co.,LTD. Designed & Supported By Haibo
Network Inc.
www.non-asbestos.com
WLT-011
